SAMSUNG ML6060D3 Refill Instructions

Kit          6

Gram      180

Tools     cartridge hole making tool

1.     

Turn the sealed bottle of toner upside down.
Tap the funnel cap.
Turn the ML6060D3 cartridge right-side-up and tap the bottom of the bottle against a counter top.

Then, tilt the SAMSUNG printer cartridge at an angle to gain access to the filling hole created as suggested by the diagram.

You can now safely insert the funnel cap into the filling hole and start pouring toner into the printer cartridge.
In case toner does not flow easily into the cartridge repeat from the beginning.

If you believe your cartridge may have been reused a lot or there is some sort of premature cartridge failure you should only fill your cartridge from 1/3 to 1/2 of its capacity at most.

Now seal the filling hole with duct tape.

Finally, gently shake the cartridge from side to side

2.      Make hole (see diagram).

 

This cartridge may also be known as ML 6060D3 or ML-6060D3 or .

The SAMSUNG ML6060D3 cartridge refill procedure can also be following for refilling the following printers:

A list of refill products for this cartridge appears below: