OCE Imagistics fx3000

Printer OCE Imagistics fx3000 Refill Instructions

CANON FX2 (H11-6321-220) / 1556A002BA

Kit          1

Gram      160

Tools     cartridge hole making tool


    Turn the sealed bottle of toner upside down.
    Tap the funnel cap.
    Turn the OCE Imagistics fx3000 cartridge right-side-up and tap the bottom of the bottle against a counter top.

    Then, tilt the printer cartridge at an angle to gain access to the filling hole created as suggested by the diagram.

    You can now safely insert the funnel cap into the filling hole and start pouring toner into the laser OCE printer cartridge.
    In case toner does not flow easily into the cartridge repeat from the beginning.

    If you believe your cartridge may have been reused a lot or there is some sort of premature cartridge failure you should only fill your cartridge from 1/3 to 1/2 of its capacity at most.

    Now seal the filling hole with duct tape.

    Finally, gently shake the cartridge from side to side

2. Make hole (see diagram).

The laser printer OCE Imagistics fx3000 has the pitney-bowes-485-5 cartridges.

This entry was posted in OCE Toner Refill Instructions and tagged . Bookmark the permalink.

Leave a Reply