Printer Lexmark 4069 Optra T Refill Instructions

E31 (F41-8801-XXX)

Kit 2

Gram 150

Tools     cartridge hole making tool

1.     

Turn the sealed bottle of toner upside down.
Tap the funnel cap.
Turn the Lexmark 4069 Optra T cartridge right-side-up and tap the bottom of the bottle against a counter top.

Then, tilt the printer cartridge at an angle to gain access to the filling hole created as suggested by the diagram.

You can now safely insert the funnel cap into the filling hole and start pouring toner into the laser Lexmark printer cartridge.
In case toner does not flow easily into the cartridge repeat from the beginning.

If you believe your cartridge may have been reused a lot or there is some sort of premature cartridge failure you should only fill your cartridge from 1/3 to 1/2 of its capacity at most.

Now seal the filling hole with duct tape.

Finally, gently shake the cartridge from side to side

2.      Make hole (see diagram).

The laser printer Lexmark 4069 Optra T has the lexmark-12a5740 lexmark-12a5745 lexmark-12a5840 lexmark-12a5845 lexmark-12a5849 cartridges.