Canon X25 Refill Instructions
Tools cartridge hole making tool
- Turn the sealed bottle of toner upside down.
Tap the funnel cap.
Turn the X25 cartridge right-side-up and tap the bottom of the bottle against a counter top.
Then, tilt the Canon printer cartridge at an angle to gain access to the filling hole created as suggested by the diagram.
You can now safely insert the funnel cap into the filling hole and start pouring toner into the printer cartridge.
In case toner does not flow easily into the cartridge repeat from the beginning.
If you believe your cartridge may have been reused a lot or there is some sort of premature cartridge failure you should only fill your cartridge from 1/3 to 1/2 of its capacity at most.
Now seal the filling hole with duct tape.
Finally, gently shake the cartridge from side to side
2. Make hole (see diagram).
This cartridge may also be known as X 25 or X-25 or 8489A001AA or canon-8489a001aa 8489A002AA or canon-8489a002aa 8489A003 or canon-8489a003 EP-26 or canon-ep-26 EP-27 or canon-ep-27 X25 or canon-x25 DK-42500 or murata-muratec-dk-42500 TS-2500 or murata-muratec-ts-2500 TS-42500 or murata-muratec-ts-42500 0938-401 or konica-minolta-0938-401 0938-402 or konica-minolta-0938-402 6R234 or xerox-6r234 6R90129 or xerox-6r90129 5R178 or xerox-5r178 6R732 or xerox-6r732 6R90166 or xerox-6r90166 40X2592 or lexmark-40×2592 DK-42500 or murata-muratec-dk-42500 TS-2500 or murata-muratec-ts-2500 TS-42500 or murata-muratec-ts-42500 .
The Canon X25 cartridge refill procedure can also be following for refilling the following printers:
A list of refill products for this cartridge appears below: