Printer Acer ACERLASER 406 Refill Instructions

Kit          4

Gram      135

Tools     flat head screwdriver

1.      Using flat head screwdriver, pry out plug (see diagram).

2.     

Turn the sealed bottle of toner upside down.
Tap the funnel cap.
Turn the Acer ACERLASER 406 cartridge right-side-up and tap the bottom of the bottle against a counter top.

Then, tilt the printer cartridge at an angle to gain access to the filling hole created as suggested by the diagram.

You can now safely insert the funnel cap into the filling hole and start pouring toner into the laser Acer printer cartridge.
In case toner does not flow easily into the cartridge repeat from the beginning.

If you believe your cartridge may have been reused a lot or there is some sort of premature cartridge failure you should only fill your cartridge from 1/3 to 1/2 of its capacity at most.

Now seal the filling hole with duct tape.

Finally, gently shake the cartridge from side to side

                            .

The laser printer Acer ACERLASER 406 has the epson-s051011 cartridges.